Cayman (987) F6-2.9L (2009)
Headlamp Control Module: Service and Repair
Removing and Installing Gas-Discharge Control Unit
Removing And Installing Gas-discharge Control Unit
Preliminary work
1. Remove main headlight.
Removing gas-discharge control unit
Removing main headlight cover
1. Unscrew the four fastening screws -1- on the cover.
2. Release the cover at one attachment point at the top and bottom and remove it from the main headlight.
3. Remove control unit for gas-discharge headlight.
Removing gas-discharge control unit
1. Unscrew the three fastening screws -1- for the control unit holder.
2. Turn the connector for the gas-discharge headlight anti-clockwise (bayonet lock) and pull it off.
3. Carefully release and lever out the electric connector -4- on the control unit using a screwdriver.