porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 2726 > < Procedures|Page 2724
Page 12
background image

9. Disconnect PASM plug connections -49 and 50- at left and right.

9.1. Release and disconnect plug connection for wheel sensor at left and right -arrow a-.

10. Release and pull off connector on rear antenna for tire pressure monitoring system -51 and 52- at left and right.
11. Disconnect and expose ABS wire harness rear on left and right -53 and 54-.

11.1. Release and disconnect plug connection for wheel sensor at left and right.
11.2. Unscrew fastening screw of connector socket.
11.3. Release rear wire harness.

12. Unclip the main wire harness in the area of the rear left spring strut.
13. Pull off connector on front seat-belt tensioner -56 and 57- at left and right.

14. Unclip main wire harness to the left side wall.

14.1. Unclip main wire harness to the left side wall -arrow A-.
14.2. Unclip cable duct to the left side wall -arrow B-.

15. Loosen cable duct to the left side wall.

15.1. Unclip main wire harness to the bottom of the B-pillar -arrow A-.
15.2. Take out cable duct upwards out of the rear wall plate -arrow B-.

16. Release and pull off connector for airbag sensor, centre left and right -58 and 59-.
17. Release and pull off connector for ParkAssist control unit -60 and 61-.

Procedures|Page 2726 > < Procedures|Page 2724