porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 2728 > < Procedures|Page 2726
Page 14
background image

24. Disconnect the plug connection between main wire harness and wire harness for door, left and right -75 and 76-.
25. Release and pull off connector for gateway control unit -81-.
26. Release and pull off connectors for KESSY/PAS control unit -82 and 83-.
27. Release and pull off connector for stop light switch -84-.
28. Release and pull off connector for pedal sensor -85-.

29. Loosen ground point under the unit carrier -92-.

29.1. Screw off fastening nut and remove ground straps.

30. Release and pull off connector for tilt sensor control unit -93-.

31. Disconnect plug connections between main wire harness and wire harness for heater/air-conditioning unit -95 and 96-.

31.1. Release lower plug connection on heater/air-conditioning unit -arrows a- and unplug.

31.2. Release upper plug connection on heater/air-conditioning unit -arrows a- and unplug.

31.3. Cut tie-wraps (main wire harness to heater/air-conditioning unit wire harness) with side cutters. Remove main wire harness.

32. Release and disconnect plug connection for rain sensor -99-.

Procedures|Page 2728 > < Procedures|Page 2726