Cayman (987) F6-2.9L (2009)
/f6-2.9l/Page-543052.png)
1. Unlock PASM plug connection -Arrow a- and disconnect it.
INFORMATION: When cutting the PASM wire harness, make sure there is enough length of cable left to join to the new lines.
2. Cut wire harness for PASM at -b- and remove it.
3. Cut through the fabric tape at -c- and expose the remaining PASM wires.
Removing wire harness for rear PASM
1. Unlock PASM plug connection -Arrow a- and disconnect it.
