Cayman (987) F6-2.9L (2009)
Engine compartment cover
6. Remove resonance tube.
7. Remove right intake-air distributor.
Removing hydraulic pump
Warning
Danger of injury and material damage when using Pentosin.
Risk of skin irritation and damage to skin.
Damage to hoses and wiring.
-
Wear protective gloves and goggles.
-
In the event of contact (eyes or skin), wash immediately with water.
-
Collect emerging Pentosin.
-
Use caps to protect the wiring against soiling and damage.
-
Clean hoses and wiring immediately.
Information
Cover engine openings (e.g. intake openings, crankcase, lines, open containers, etc.) with a cloth to prevent dirt and foreign bodies from getting into
the openings.
The air-conditioning lines on the compressor do not need to be opened in order to remove the hydraulic pump. After removal, place the
air-conditioning compressor on a suitable protective support (e.g. foam or neoprene).
Overview of hydraulic pump
1 - Reservoir
2 - M8 screw
3 - Pulley (plastic)
4 - Hydraulic pump
5 - Holder
6 - M8 screw