Cayman (987) F6-2.9L (2009)
1. Disengage the parking-brake cable at the parking-brake lever.
Removing/fitting parking-brake cable
Release the parking-brake lever (do not operate again until fitting is complete; self adjusting).
Open cover of oddments tray in centre console.
Remove bottom of oddments tray in centre console.
Remove the relevant parking-brake cable sideways out of the turnbuckle.
2. Disconnect and remove electric connections (combination wire) on the wheel bearing housing.
Combination wire
Open safety clip on combination wire for ABS and brake pad wear indicator on the wheel bearing housing and pull out the connectors.
Screw out screw -1- on combination wire.
Remove line for brake pad wear indicator from the support on the spring strut.
3. Remove speed sensor.
4. Loosen holder for brake line/brake hose at the wheel bearing housing.
5. Remove brake calliper.
Release brake calliper from wheel bearing housing (do not open brake system) and suspend it in the wheel arch.