Cayman (987) F6-2.9L (2009)
Tire Pressure Monitor Antenna: Service and Repair
Removing and installing TPM antenna
Removing and installing TPM antenna
Preliminary work
1. Remove cover for centre underbody.
Removing TPM antenna
Installation position of TPM antenna
Notice
Voltage peaks
Risk of damage to load or to the control unit
-
Remove the ignition key and switch off load before disconnecting or removing load.
1. Release -arrow A- and pull off -arrow B- connector.
Pulling off connector
2. Unclip tire pressure monitoring system (TPM) antenna from the holder -arrow A- and remove it -arrow B-