Cayman (987) Automatic Transmission Differential Output Shaft Replacement
ATF cooler
3. Fit ATF cooler.
3.1.
Screw in and tighten screws -1-.
Always use new aluminium screws. Blow out threaded bore thoroughly with compressed air.
Tighten M6 screws at "medium" setting.
-
Tightening torque: 2.4 Nm (2 ftlb.)
4. Fit ATF lines on transmission.
Holder for ATF lines
4.1.
Press ATF lines -3- into the Porsche Doppelkupplung.
4.2.
Fit clamping holder -1- and screw in and tighten screw -2- on the Porsche Doppelkupplung using an electronic torque wrench 9768.
Always use new aluminium screws. Blow out threaded bore thoroughly with compressed air.
Tighten M8 screws at "medium" setting.
-
Tightening torque: 6 Nm (4.5 ftlb.)
5. Connect coolant hoses at the ATF cooler.