Cayman (987) F6-2.9L (2009)
1. Raise the vehicle at the specified jacking points.
2. Place oil collection pan under the transmission.
3. Remove support plate.
Support plate
3.1.
Remove diagonal braces.
Unscrew M10/M12 screws and M10 nuts and remove diagonal braces -1-.
3.2.
Remove support plate.
Unscrew M10 x 25 screws and M10 nuts and remove support plate -2-.
4. On the oil filler screw side, mask the area between the ATF pan and transmission housing with adhesive tape to prevent dirt from getting into the
oil pan.
Checking and topping up ATF clutch fluid
Notice
Oil fill level too low
Risk of damage to components
-
Do not start engine.
-
Do not tow the vehicle.
Information
Before getting started, the transmission in the stationary vehicle must already be filled with ATF.
1. Pre-fill ATF.
1.1.
Get the vehicle ready:
Move selector lever to position "P".
Start the engine and allow to run at idle speed.
Apply the parking brake.
1.2.
Unscrew ATF filler plug -1-.