Cayman (987) F6-2.9L (2009)
9. Remove lines for ATF cooler.
9.1.
Place oil collection pan underneath.
Holder for ATF lines on ATF cooler
9.2.
Remove ATF lines on the ATF cooler.
9.2.1.
Unscrew M6 x 12 screw -1- and pull out and remove ATF line -2- on the ATF cooler.
9.2.2.
Unscrew M6 x 12 screw -3- and pull out and remove ATF line -4- on the ATF cooler.
Installing lines for ATF cooler
Warning
Hot fluid
Danger of scalding
-
Let the fluid cool down.
-
Wear personal protective gear.
Warning
Caustic fluid
Danger of chemical burns
-
Avoid contact with caustic fluid.
-
Wear personal protective gear.
-
Ensure that there is good ventilation.
-
If you do come into contact, wash off immediately with plenty of warm water and contact a doctor if necessary.
1. Install lines for ATF cooler.
Holder for ATF lines on ATF cooler