Cayman (987) F6-2.9L (2009)
/f6-2.9l/Page-459004.png)
Pressing out wheel bearing
Warning
Hot wheel bearing housing!
Danger of burns
-
Wear heat-resistant gloves!
6. Press out wheel bearing inner race.
Information
To press out the inner bearing race of the old wheel bearing, pull the inner bearing race several millimeters off the wheel hub using a two-claw puller
so that the separator can be put into place. To do this, use a two-claw puller together with a pressure piece VW 433, for example.
Pressing out bearing race
Pull inner bearing race several millimeters off the wheel hub using a two-claw puller.
Press out inner bearing race using a press-out mandrel P 297a together with the separating device ([diameter] = 12 - 115 mm) NR.111.
Installing rear wheel bearing
Installing
Before installation, clean the bore in the wheel bearing housing and remove edges with a polishing cloth.
The following tools are required for installing the rear wheel bearing.
