Cayman (987) F6-2.9L (2009)
Retaining tool for drive-shaft bolts
8.2.
Screw in and tighten the six M10 bolts between the drive shaft and transmission flange.
Drive shaft
-
Tightening torque: 81 Nm (60 ftlb.)
9. Install the transverse strut.
Fit cross member -2- and screw in and tighten M10 x 72 screws -1-.
-
Tightening torque: 65 Nm (48 ftlb.)
Transverse strut
10. Install support plate.