porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Sealing Ring For Short Halfshaft Flange|Page 2391 > < Removing and Installing Sealing Ring For Short Halfshaft Flange|Page 2389
Page 7
background image

7.2.

Pull ATF lines -3- out of the Porsche Doppelkupplung.

ATF cooler

7.3.

Detach ATF cooler and press upwards.

Loosen and unscrew M6 x 12 screw -1- and press ATF cooler -2- upwards.

8. Remove mounting saddle using a long halfshaft flange.

Long halfshaft flange

8.1.

Loosen and unscrew screws -1 to 5-.

8.2.

Drive out long halfshaft flange -1- using striking tool VW 771/1 (-2-).

Long halfshaft flange

8.3.

Remove the mounting saddle -2- using a long halfshaft flange -1-.

Removing and Installing Sealing Ring For Short Halfshaft Flange|Page 2391 > < Removing and Installing Sealing Ring For Short Halfshaft Flange|Page 2389