Cayman (987) F6-2.9L (2009)
Seals and Gaskets: Service and Repair
Removing and Installing Sealing Ring For Input Shaft
Removing and installing sealing ring for input shaft
Preliminary work
1. Remove transmission.
2. Remove guide sleeve.
Removing sealing ring for drive shaft
1. Press guide sleeve on sufficiently and drive sealing ring out of the guide sleeve using a punch.
Removing sealing ring
Installing sealing ring for input shaft
Installing sealing ring for drive shaft - 5-speed transmission
1. Place new sealing ring on side of pressure piece P 9743 with no cut-out.