Cayman (987) F6-2.9L (2009)
2. Locking bridge P 9619/1 must be fitted on the gearshift bracket.
Fitting locking bridge
3. Remove transport and assembly sleeves from the adjustment pins.
4. Connect shift and selector cables on the gearshift bracket.
4.1.
Clip in support on the gearshift bracket.
Clipping in support
The support with the blue hinged tube must be fitted on the left and the support with the black hinged tube must be fitted on the right.
4.2.
Insert adjustment pin without tension into the pre-selector and shifting connections and press down firmly.
Engaging shift cables
4.3.
Close bayonet locks on the pre-selector and shift connections.