porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

General Information on Removing the Rear Window|Page 5836 > < Removing and Installing Microswitch For Window Opening Controls|Page 5830
Page 1
background image

Back Window Glass: Service and Repair
General Information on Removing the Rear Window

General Information On Removing The Rear Window

Tools

Removing glass with cutting wire separator

Danger of injury when working on car windows

DANGER:  Danger of cut injuries when removing and installing car windows.

-

Cutting out glued car windows may lead to cut injuries to the skin and eyes due to flying glass splinters and may result in cut injuries
from the knife of the cutter.
-

Always wear protective gloves when working on car windows.

-

Wear protective goggles when cutting out car windows.

-

Only replace the cutting knife with the power supply disconnected so that the cutter is not switched on accidentally.

Removing glass with cutting device - wire separator

INFORMATION:

-

The following instructions describe the general procedure for removing car windows with the glass separating tool VAG 1474 B.

-

Information on procedures relating to specific vehicles can be obtained from the instructions in the corresponding Technical Information.

-

It is generally possible to remove the windscreen with the cutting wire and the optional cutting thread contained in the tool set.

-

In contrast to cutting threads, however, the cutting wire has the following disadvantages:

-

Danger of injury when tearing off the cutting wire.

-

Danger of damage to materials on paint surfaces and interior equipment parts.

-

For the reasons outlined above we recommend using the cutting thread.

General Information on Removing the Rear Window|Page 5836 > < Removing and Installing Microswitch For Window Opening Controls|Page 5830