Cayman S (987) F6-3.4L (2008)
Front Door Exterior Handle: Overhaul
Disassembling And Assembling Door Handle
Preliminary work
1. Remove door handle. Refer to Removing and installing door handle.
2. Remove microswitch for window opening controls. Refer to Removing and installing microswitch for window opening controls.
Disassembling door handle
1. Press out circlip -1-, pull pin -2- out of the handle and remove actuating shaft -3-.
2. Pull pin rod -4- out of the handle liner -9- and separate handle -8- from the handle liner.
3. Remove return spring -6-, eccentric -5- and sleeve -7-.
4. Pull buffer -10- out of the handle -8-, check it and replace if necessary.
Assembling door handle
1. Fasten buffer -10- to handle -8-.
2. Position return spring -6-, eccentric -5-, sleeve -7- and handle -8- on the handle liner -9- and press in pin rod -4-.
3. Position actuating shaft -3- on handle. Insert pin -2- and secure pin with the circlip -1-.
Subsequent work
1. Install microswitch for window opening controls. Refer to Removing and installing microswitch for window opening controls.
2. Install door handle. Refer to Removing and installing door handle.