Cayman S (987) F6-3.4L (2008)
Trunk / Liftgate Weatherstrip: Service and Repair
Removing And Installing Rear Lid Seal
Removing the lid seal
Removing rear lid seal
1. Open rear lid.
2. Pull off seal from the flanges at the corner pieces -A-, the side panels -B- and closing panel -C-.
3. Lift the seal up and off.
Installing rear lid seal
INFORMATION:
-
Before replacing, check the existing seal for signs of damage (areas torn, crushed, etc.). If there are signs of damage, the seal must be replaced.
-
The seal is pressed onto the flange without any additional sealants.
1. Position the seal from above.