Cayman S (987) F6-3.4L (2008)
Body Emblem: Service and Repair
Removing and Installing Front Logo
Removing And Installing Front Logo
Technical values
Removing front logo
1. Open front lid.
2. Unscrew fastening nuts -3-.
3. Remove logo -1- and washer -2-.
Installing front logo
1. Always replace fastening nuts -3-. Insert base -2- and logo -1- into the lid and secure with new fastening nuts -3-. Tightening torque: 1.3 Nm (1.0
ftlb)
2. Close front lid.