Cayman S (987) F6-3.4L (2008)
3. Unscrew fastening screw -1-.
4. Pull out C- pillar trim panel -2- slightly at the top -Arrow A-.
INFORMATION: In order to reduce the unclipping forces and thereby the risk of damage during removal, the process must take place at the
accessible connection points using a suitable tool.
5. Unclip C- pillar trim panel -2- with a plastic wedge and remove in direction of arrow -B, C-.
6. Pull off connector for interior light.
7. Check clamps -2-, and replace if necessary.
Installing C-pillar trim
Installing C-pillar trim panel