Cayman S (987) F6-3.4L (2008)
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
Description:
-
Conventional basecoat for double-layer solid, metallic and pearl-effect paint finishes
Properties:
-
Optimum color accuracy
-
Excellent filling properties
-
Good coverage
-
Suitable for spot painting
Base surfaces:
-
Hardened paintwork, sanded
-
Standox(R) 2K Nonstop Primer Filler
-
Standox(R) 2K Universal Filler
-
Standohyd(R) 1K Primer Surfacer
-
Please note base surface pre-treatment instructions:
-> S 5.1
-> S 6.1
-> S 9.2.2
NOTE:
-
Raw material base: Physically-drying special resin
-
Flash point: 25° C/77° F
-
Spec. weight: 0.93-1.06 g/cm3
-
Solid content: 22.0-37.2% weight/17.7-22.0% vol.
-
Theoretical yield: 7.1-8.8 m2/ltr. with a dry coat thickness of 25 microns
-
In higher layers (multiple paint layers) of 40 microns or higher, mix Standox(R) Basecoat with 20% Standox(R) 2K Hardener MS 25-40 /
Standox(R) 2K Hardener MS X 5-25 or 15% Standox(R) 2K Hardener HS 25-40 and set with 40% Standox(R) Thinner MSB 15-25. Allow a
correspondingly longer time to dry.
-
Standox(R) Basecoat can be masked after 45-60 min./20° C or after oven-drying. Hardened Standox(R) Basecoat should only be masked
following oven-drying.
-
Clean equipment after use with cleaning thinner
VOC value:
-
460-719 g/l
S 9.7.1.1 Processing