Cayman S (987) F6-3.4L (2008)
12. Remove adhesive tape -2- from the backrest shell -1-.
Subsequent work
Removing creases in seat cover (leather)
CAUTION: Risk of damage to cover if excessive heat is applied.
-
Creases in cover
-
If creases have formed, only short partial warming with the hot-air gun is permissible.
-
The hot-air temperature must always be -> Temperature: 50°C.
1. If creases have formed, partially heat the affected areas of the cover with the hot-air gun and smooth out the cover using the special tool.
Scudding knife P 9747
Knurling tool P 9747/1
Bone burnisher P 9747/2
Hot-air gun v.a.g 1416
Subsequent work
1. Install top belt strap guide. Refer to Removing and installing belt strap guide (folding sports bucket seat).
2. Remove sports bucket seat from the assembly fixture and install it. Refer to Removing and installing folding sports bucket seat.
Removing and Installing Cover For Front Middle Backrest
Removing and Installing Cover For Front Middle Backrest
Removing cover for front middle backrest