Cayman S (987) F6-3.4L (2008)
/f6-3.4l/Page-819006.png)
2.4. Heat the rear spoiler trim -1- in area -A- (adhesive tape) with the hot-air blower v.a.g 1416.
2.5. Lift up rear spoiler trim -1- and remove it along with the spacers -2- (-arrows-).
2.6. Slide the spacer bolt -2- to one side, turn it -arrows- and remove it from the rear spoiler trim -1-.
2.7. Scrape off adhesive residue -A- on the rear spoiler trim -1- using a metal scraper.
2.8. Clean bonding surfaces with isopropanol.
INFORMATION: Only when replacing the rear apron.
3. Remove adapters for rear spoiler trim at the left and right.
3.1. Heat the adapter -1- in area -A- (adhesive tape) with the hot-air blower -arrows-.
