Cayman S (987) F6-3.4L (2008)
INFORMATION: Clean bonding surface to remove any dust and grease.
1.6. Stick strips of adhesive tape on the underside of the lower part of rear spoiler according to the designations -A, B, C, C, D, E-. Place the
pulling aids -X- over the edge of the rear spoiler.
INFORMATION: Clean bonding surface to remove any dust and grease.
1.7. Attach sealing cord -1- to the underside of the lower part of rear spoiler -2- by inserting it into the groove -arrows- and stick it on with Loctite
406.
Remove adhesive residue on visible and contact surfaces of the sealing cord.
INFORMATION: Clean bonding surface to remove any dust and grease.
1.8. Stick support tape -1- (transparent adhesive film) to the bar on the underside of the lower part of the rear spoiler -2-.