Cayman S (987) F6-3.4L (2008)
2. Connect plug connection -8-.
CAUTION: Material damage to spoiler drive
-
This can lead to leaks in the area (mounting plates) around the vertical unit.
-
If the spoiler drive is removed or the fastening screws 6 are loosened, the mounting plates 7 must always be replaced.
3. Position both mounting plates -7- and tighten with the four fastening screws -6-. Tightening torque: 10 Nm (7.5 ftlb.)
4. Tighten fastening screw -4- with the washer -5-. Tightening torque: 10 Nm (7.5 ftlb.)
5. Tighten the three fastening nuts -2- with the washers -3-. Tightening torque: 10 Nm (7.5 ftlb.)
Subsequent work
1. Install rear spoiler. Refer to Removing and installing rear spoiler.
2. Install rear luggage-compartment lining. Refer to Removing and installing trim panel of rear luggage compartment.
3. Install cover for rear lock support. Refer to Removing and installing cover for rear lock support.