Cayman S (987) F6-3.4L (2008)
/f6-3.4l/Page-218006.png)
Subsequent work
Subsequent work
1. Check coolant line connections and hoses for leaks.
2. Completely install rear underbody panel.
3. Test drive the vehicle. Following the test drive and when the engine is still at operating temperature, accelerate briefly to greater than 6,000 rpm
a number of times at idle speed in order to fully ventilate the system.
4. Check the fluid level with the aid of the marks on the expansion tank. If necessary, correct the coolant level after the engine has cooled.
