Cayman S (987) F6-3.4L (2008)
Removing belt pulley - engine installed
Note
To release and tighten the belt pulley, a second person must counter with the relevant retaining tool.
Belt pulley components
Component overview
^
1 - Belt pulley
^
2 - Washer
^
3 - Fastening screw
1. Position retaining device 9593 and a large torque wrench on the belt pulley and loosen the fastening screw. A second person must counter with the
retaining tool.
2. Unscrew fastening screw and remove belt pulley.
Installing belt pulley
Installing belt pulley - engine installed
Note
Degrease the belt pulley before installation on the flange side of the crankshaft using solvent naphtha or acetone.