Cayman S (987) F6-3.4L (2008)
/f6-3.4l/Page-190015.png)
8. Coat cylinder bores 1-3 with plenty of new engine oil.
9. Insert piston, together with connecting rod, into cylinder bore 1, universal piston ring restraining strap, 75-125 mm NR.55 must lie evenly on
cylinder surface.
10. Pay attention to direction of assembly: arrow on piston crown always points to flywheel side
Caution
Incorrect and careless assembly of pistons.
^
Component damage (pistons, piston rings, cylinder line)
-> Assemble pistons carefully and gently.
-> Stop process immediately if there is increased resistance during assembly; eliminate the cause of the problem.
11. Hold the piston ring restraining strap firmly and press piston in a cable into the cylinder bore using a plastic mandrel.
