Cayman S (987) F6-3.4L (2008)
Hose/Line HVAC: Removal and Replacement
Removing and Installing Evaporator-Fluid Tank Line
Removing And Installing Evaporator-Fluid Tank Line
Technical Values
Preliminary work
Preliminary work line condenser-fluid tank
Draining refrigerant.
Removing cowl panel cover.
Removing the battery.
Removing the condenser-fluid tank line
INFORMATION:
-
Before re-installing the component, check the O-rings of the refrigerant lines for damage and replaced them if necessary.
-
Wet the O-rings of the refrigerant lines with refrigerant oil.
-
Do not open the plugs for the lines and connections until shortly before installation.
-
Close off all lines and connections using suitable plugs during removal.
1. Unscrew fastening nut -1-.
2. Remove the holder for the two refrigerant lines and pull the refrigerant line condenser-fluid tank out of the expansion valve.