Cayman S (987) F6-3.4L (2008)
Removing and Installing Compressor-Condenser Line At Front
Removing And Installing Compressor-Condenser Line At Front
Technical Values
Preliminary work
Preliminary work on compressor-condenser line
Remove front right wheel.
Remove front right wheel housing liner.
Drain refrigerant.
Removing compressor-condenser line
INFORMATION:
-
Before re-installing the component, check the O-rings of the refrigerant lines for damage and replaced them if necessary.
-
Wet the O-rings of the refrigerant lines with refrigerant oil.
-
Do not open the plugs for the lines and connections until shortly before installation.
-
Close off all lines and connections using suitable plugs during removal.
INFORMATION: When loosening or tightening the M8 refrigerant lines on the condenser, always counter with a 21-mm open-ended wrench.
1. Unscrew the fastening screw -1- for the condenser line and pull the line out of the condenser.