Cayman S (987) F6-3.4L (2008)
Wiring Harness: Procedures
Connector - General Information
Tools
Connector - General information
INFORMATION:
-
For repairing wire harnesses, the wire harnesses listed in step 1 are only offered as complete units, without exchanging individual connectors.
-
For repairing or replacing connectors on wire harnesses which do not have to be completely replaced, the correct procedure is listed under Step 2
and 3.
1. Wire harnesses which are replaced only as a complete unit.
1.1. Wire harness for door and wire harness for door trim panel
See: Removal and Replacement/Removing and Installing Wiring Harness For Door
1.2. Wire harness for centre console
See: Removal and Replacement/Removing and Installing Wiring Harness For Centre Console
1.3. Wire harness for number plate light
See: Removal and Replacement/Removing and Installing Wiring Harness For Number Plate Light
1.4. Wire harness for glove compartment
See: Lighting and Horns/Courtesy Lamp/Glove Box Lamp Switch/Service and Repair
1.5. Wire harness for engine
See: Removal and Replacement/Removing and Installing Wiring Harness For Engine
1.6. Wire harness for battery wiring
See: Removal and Replacement/Removing and Installing Wiring Harness For Battery Wiring
1.7. Antenna leads
See: Accessories and Optional Equipment/Antenna/Antenna, Radio/Antenna Cable/Service and Repair
INFORMATION: Only in the coupe.
1.8. Wire harness for rear spoiler
See: Removal and Replacement/Removing and Installing Wiring Harness For Rear Lid
2. Connectors contained in the Repair kit for harnesses NR.155-1 and can be replaced individually.
CAUTION: Using plug-in contacts made of different materials
-
Oxidation of plug-in contacts
-
Only use the plug-in contacts listed in the wiring diagram for the corresponding plug connection. Always plug gold contacts together with gold
contacts.
-
The wiring diagrams can be displayed using the PIWIS Tester P 9718.
For repairing wire harnesses individual connectors are offered in a Repair kit for harnesses NR.155-1. In this Repair kit for harnesses NR.155-1,
connectors are contained primarily that are installed in crash and external areas.