Cayman S (987) F6-3.4L (2008)
2. Push together the retaining tabs for the control unit and pull the two catches back. Lift control unit up and out.
WARNING: Risk of damage to electronic control modules.
-
If care is not taken, electrical and electronic components may be destroyed.
-
Before removing the control module, switch off the ignition and remove the ignition key.
3. -A- Carefully lever the connector away from the control unit using two screwdrivers.
4. -B- Carefully lever the connector away from the control unit using one screwdriver.
Installing control module for ParkAssist
INFORMATION: If the ParkAssist control unit has to be replaced, the values from the control unit should first be read out using the PIWIS Tester
9718.
1. Press electrical connectors -A, B- into control unit until they are felt to engage.