porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Seat Occupant Classification Module - Air Bag|Testing and Inspection|Page 3026 > < Seat Occupant Classification Module - Air Bag|Testing and Inspection
Page 2
background image

5. Switch from the vehicle type to the list of control units and press >>.
6. Select AWS control unit and press >>.
7. Select the Calibration menu and press >>.
8. The Tester displays several messages and instructions relating to the individual work steps until the message Test step has been completed

successfully appears. Press >>

9. Select the System test menu in the AWS control unit.

10. Follow the instructions on the Tester. Then press >> and perform the test using the default sequence.

10.1. Seat empty - the passenger's seat must be empty. The Passenger Airbag Off indicator light in the centre console must not come on. To

determine the status, press F7 or F8. Then press >>.

10.2. Child - place the special tool test weight P 9742 on the passenger's seat. The Passenger Airbag Off indicator light in the centre console must

come on. To determine the status, press F7 or F8. Then press >>.

10.3. Adult - get an assistant, for example, to sit on the passenger's seat. The Passenger Airbag Off indicator light in the centre console must not

come on. To determine the status, press F7 or F8. Then press >>.

10.4. Seat stuck - the passenger's seat must be empty. The seat must also be relieved of any pressure, e.g. by lifting the seat up with your hand.

The Passenger Airbag Off indicator light in the centre console must come on. In addition to the Airbag Off indicator light, a message is
displayed in the instrument cluster: Check passenger seat adjustment. To determine the status, press F7 or F8. Then press >>

11. To check the system, select the Actual values menu under the AWS control unit. Then press >>

11.1. Select the Weight class (0-4) and Total weight calibrated options.

11.1.1. If there is no weight on the passenger's seat, compare values (see table below) using the PIWIS Tester. The Passenger Airbag Off

indicator light in the centre console must not come on.

11.1.2. Place the special tool test weight P 9742 on the passenger's seat. The Passenger Airbag Off indicator light in the centre console

must come on. Compare values (see table below) using the PIWIS Tester.

11.1.3. Get an assistant with a body weight of more than 55 kg, for example, to sit on the passenger's seat. The Passenger Airbag Off

indicator light in the centre console must not come on. Compare values (see table below) using the PIWIS Tester.

12. Read out and erase the fault memories in the Airbag and AWS control unit, perform a test drive and then read out the fault memories again. If

faults are found, determine the cause using the PIWIS Tester and correct the faults.

Seat Occupant Classification Module - Air Bag|Testing and Inspection|Page 3026 > < Seat Occupant Classification Module - Air Bag|Testing and Inspection