Cayman S (987) F6-3.4L (2008)
Ultrasonic Sensor: Service and Repair
Removing And Installing Interior Monitoring Sensor
Tools
Preliminary work
Preliminary work for interior monitoring sensor
Remove centre console.
Removing interior monitoring sensor
1. To protect it, set the centre console down on a suitable base.
2. Lift the two retaining tabs aside and pull out the sensor.
3. Unplug electric plug connection and remove sensor.
Installing interior monitoring sensor
1. Insert sensor into the centre console until it clicks into place.
2. Plug electric connector into sensor.
Subsequent work
Subsequent work for interior monitoring sensor
Install centre console.
Coding interior monitoring sensor
INFORMATION:
-
If the interior monitoring sensor is replaced, the sensor must be coded in the control unit using the PIWIS Tester 9718. This adapts the interior