porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 2235 > < Procedures|Page 2233
Page 29
background image

24.1. Clip in wire harness for telephone control unit.

25. Clip in wire harness under driver's seat.

26. Fasten ground point under the driver's seat -65-.

26.1. Connect ground straps and screw down fastening nut. Tightening torque: 9 Nm (6.5 ftlb.)

27. Push on connectors for rear end convenience systems control unit -62 to 64- until they are felt to engage.
28. Push on connectors for ParkAssist control unit -60 and 61- until they are felt to engage.
29. Push on connectors for airbag sensor, centre left and right -58 and 59- until it is felt to engage.

Procedures|Page 2235 > < Procedures|Page 2233