Cayman S (987) F6-3.4L (2008)
Preparing window frame for installation
Removing adhesive from the body
INFORMATION: The surface coating of adhesive residue on the window aperture of the body acts as an adhesive base for new bonding material.
Keep cut surfaces clean and free of grease and do not clean with cleaning solution.
1. When removing remaining adhesive -2- with the cutting tool -C- and the flashing knife -D- on the body, ensure that a surface coating of adhesive
remains -3-.
Cleaning and priming areas that are free of adhesive residue or have paint damage or where there is newly built-up paint in the window
aperture of the body
INFORMATION: A flash-off time of at least 2 minutes must be observed between the cleaning of the window aperture and the application of the
primer. No cleaning solution residues must remain on the body.
1. Clean areas that are free of adhesive residue or have new paint or where there is damage to the top coat paint in the non-visible area of the window
aperture in the body with cleaning solution -H1- and touch up with primers -H2-.
Preparing windscreen for installation