Panamera (970) V6-3.6L (2011)
7. Pull vacuum line off the vacuum pump. -3-
8. Remove centre plenum panel wall at the top.
8.1. Remove fastening screws. -> Centre plenum panel at the top
8.2. Lift the centre plenum panel wall at the top and pull the vacuum line through the bore in the grommet. -> Guiding vacuum line through the
plenum panel wall
9. Remove strut (A-strut).
9.1. Detach lines (vacuum, tank vent, fuel) and remove plastic clip. -4 and 5- Release the plastic clip by inserting a screwdriver through the side
hole in the strut and pull it off.