Panamera 4S (970) V8-4.8L (2011)
/v8-4.8l/Page-49004.png)
3. Unscrew fastening screw -1- securing wheel housing liner to front apron.
4. Unscrew plastic nut -2- securing front section of wheel housing liner to rear section of wheel housing liner.
5. Unscrew fastening screws -1- securing front section of wheel housing liner to rear section of wheel housing liner.
6. Remove wheel housing liner.
Installing front section of front wheel housing liner
INFORMATION: Some of the repair illustrations show only one side of the vehicle. Naturally, some steps also have to be performed on the
opposite side of the vehicle as well. These must be carried out as a mirror image of the steps shown.
1. Place the wheel housing liner in installation position.
