Panamera 4S (970) V8-4.8L (2011)
2.3. Remove fastening screws on the right plenum panel wall. - Mounting for right-hand side plenum panel wall
2.4. Remove plenum panel wall.
3. Remove left plenum panel wall.
3.1. Disconnect cable plugs on the two sensors -1 and 2- (prevents damage to the plugs during subsequent work). Ensure that you detach the cable
plug from the spring strut -1 - vertically (risk of breakage).
3.2. Detach and expose wiring harness at the plenum panel wall. -3-
3.3. Remove fastening screws on the left plenum panel wall. -> Mounting for left-hand side plenum panel wall
3.4. Remove plenum panel wall.