Panamera 4S (970) V8-4.8L (2011)
1. Before re-installing the centre plenum panel at the bottom, first fit the seal on the edge of the plate and spray with commercially available silicone
spray (this makes it easier to push on the plenum panel wall). -> Seal on centre plenum panel at the bottom
2. Fit centre cover (centre plenum panel wall) at the bottom. -> Centre plenum panel at the bottom
2.1. Get another mechanic to help you move the centre plenum panel wall at the bottom into installation position and press on the seal. Align the
plenum panel wall.
3. Fit side cover (seal) at the right. -> Side seal at the right
4. Fit foam pads on both sides. -> Foam pads
5. Fit strut (A-strut).