Panamera 4S (970) V8-4.8L (2011)
/v8-4.8l/Page-52010.png)
16. Screw in fastening screws -1- on the cable duct at the driver's side. - Tightening torque: 3.2 Nm (2 ftlb.)
17. Screw in fastening screws -1- on the cable duct at the passenger's side.
18. Fit tie-wraps if necessary in order to secure the wire harness to the dashboard support.
19. Lower the insulating mat.
20. Guide electric connections through the insulating mat.
21. Install bracket for fuse box at the left and right.
Swivel the holder -1- into place -arrow B- .
Insert guide pins -2- into the guides -arrow A- .
Subsequent work
1. Install combination sensor.
