Panamera 4S (970) V8-4.8L (2011)
/v8-4.8l/Page-61006.png)
19. Unscrew fastening screws -1- at the left and right.
20. Disconnect dashboard support -1- from the wire harness -2-.
21. Guide the dashboard support -1- out of the wire harness and remove it at the driver's side -arrow A-.
Installing dashboard support
1. Move dashboard support -1- into the passenger compartment from the driver's seat -arrow A- and guide it into the wire harness -2- .
2. Screw in fastening screws -1- at the left and right, but do not tighten yet.
3. Align and tighten fastening screws -1- according to markings -2- . - Tightening torque: 23 Nm (17 ftlb.)+/-2 Nm (+/-1.5 ftlb.)
