Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-541001.png)
Acceleration/Deceleration Sensor: Service and Repair
Replacing combination sensor
Preliminary work
Information
The combination sensor is located under the center console.
The functions listed below are integrated into the combination sensor:
*
Rate-of-turn sensor
*
Lateral acceleration sensor
*
Axial acceleration sensor
Remove air guide.
General warning notes
Warning notes
WARNING
Combination sensor not calibrated or calibrated incorrectly
*
Unexpected vehicle handling
*
Combination sensor does not function
*
Malfunction in combination sensor
-> Calibrate the vehicle after installing or replacing the combination sensor using PIWIS Tester II 9818.
-> Only perform calibration when the vehicle is positioned horizontally and the brake is not actuated.
Replacing combination sensor
