Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-1095002.png)
5. Twist holder together with control unit for distance measuring sensor, release cable clip -2- and remove the electric line.
6. Remove holder together with control unit for distance measuring sensor.
Installing control unit for distance measuring sensor
1. Position holder together with control unit for distance measuring sensor.
2. Place electric line into cable clip -2- and clip together.
3. Position holder on bumper and secure using the two fastening screws -1-.
4. Press in the electric plug until it clicks into place.
5. Fit cover for distance measuring sensor.
Subsequent work
Subsequent work after removing and installing control unit for distance measuring sensor
If the control unit for the distance measuring sensor was removed and installed or replaced, the control unit for the distance measuring sensor will need
to be readjusted on a measuring platform using adjustment tool VAS 6430.
