Panamera S (970) V8-4.8L (2010)
Oil circuit for turbocharger, cylinders 5 to 8
1 - Oil feed line for turbocharger, cylinders 5 to 8; oil feed line for turbocharger to connection piece; oil feed line for turbocharger to cylinder head
2 - Vent line for turbocharger, cylinders 5 to 8; vent line to oil extraction line for turbocharger
3 - M6 screw; oil extraction line for turbocharger to oil guide housing and holding clamp
4 - Holding clamp
5 - Oil extraction line
6 - Screw, M6 x 16
7 - Seal
10. Remove oil level sensor. To do this, pull off the connector and release the cable.
Oil level sensor
11. Remove screws -arrows-. Remove oil level sensor by turning it. Oil will start to drip.
Screws on oil level sensor
12. Remove oil pressure control valve.
13. Remove oil pan.
14. Remove the bottom two screws between the transmission and oil guide housing.