Panamera S (970) V8-48L (2010) Timing Chain Tensioner Specs
Timing Chain Tensioner: Service and Repair
Removing and installing chain tensioner
Preliminary work
1. Remove right air guide on the turbo engine.
Air cleaner outlet on turbo engine, right
1 - Right intake manifold
Removing chain tensioner
Make sure the vehicle cannot start. To do this, switch off ignition and remove ignition key.
1. Make room for removing the chain tensioner by loosening the wire harness.
1.1.
Open the retaining clip -3- ( -arrow B- ) and remove the B+ line -4- ( -arrow C- ).
Wire harness on generator
2. Disconnect plug connection for generator.
2.1.
Release plug connection for generator -1- ( -arrow A- ) and disconnect it -arrow B-.
2.2.
Pull off plug connection for generator -1- together with the line bracket from the B+ line -arrow C-.