Panamera S (970) V8-4.8L (2010)
Timing Cover: Service and Repair
Removing and installing timing-case cover
Preliminary work
1. Remove the engine.
2. Remove transmission from engine and suspend it on the assembly support.
3. Drain engine oil.
4. Remove drive belt.
5. Remove coolant hoses in front of the timing-case cover. Don't forget the holder.
Coolant return line on turbo engine, for example
1 - Connection piece on generator
2 - Connection piece screw
3 - Screw, M6 x 20
4 - Coolant return line
5 - Coolant return hose assembly
6 - Holder
7 - M6 screw Aluminum screw; always use new aluminum screws
8 - Clip
6. Remove both valve covers.
7. Remove vibration damper.
8. Remove joint flange behind the vibration damper and do not re-installed old flange.
9. Remove oil pan and oil guide housing.
Information
Component overview