Panamera S (970) V8-4.8L (2010)
Spark Plug: Service and Repair
Removing And Installing Spark Plugs
Tools
Technical values
Preliminary work
1. Switch off ignition and remove ignition key.
2. Remove bar ignition modules.
Removing spark plugs
INFORMATION:
-
Use only spark plugs approved by Porsche AG.
-
Check electrode gap before screwing in a new spark plug.
1. Loosen spark plugs using special tool spark plug socket and extension 3122 B. -> Loosening spark plugs using spark plug socket and extension
1.1. The spark plugs for cylinders 3, 4 and 8 need a shorter tool setup. Use a medium extension with a cardan joint and spark plug socket for this.
NOTE:
-
Bits of electrodes can fall into the combustion chamber
-
Only check electrode gap of spark plugs, but do not bend them.
-
Spark plugs with an incorrect electrode gap must be replaced.