Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-767004.png)
3. Unclip the fuel line at the underbody of the vehicle -arrows-.
4. Guide the fuel line out of the wheel housing.
Installing fuel line for auxiliary heating
INFORMATION: Always replace the clamps on the fuel line during installation.
1. Installation is carried out in reverse order.
Subsequent work
1. Install wheel housing liner.
2. Install fuel pump for auxiliary heating.
3. Install heat shields. See illustration.
-
Tightening torque: 2.8 Nm (2 ftlb.) -4-
-
Tightening torque: 2.5 Nm (2 ftlb.)
