porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Dashboard Support|Page 6276 > < Removing and Installing Dashboard Support|Page 6274
Page 6
background image

7. Pull the electric line for the loudspeakers at the left and right into the dashboard.

8. Screw in fastening screws for the dashboard.

-

Tightening torque: 3.2 Nm (2 ftlb.)

9. Screw in the three fastening screws -4- at the left and right side.

-

Tightening torque: 3.2 Nm (2 ftlb.)

10. Screw in the hexagon socket screw -5- at the sides of the dashboard.
11. Replace and tighten the tie-wraps on the line for the passenger airbag unit.
12. Replace the tie-wraps on the two wire harnesses going to the centre console, join them at the dashboard and tighten them.

Removing and Installing Dashboard Support|Page 6276 > < Removing and Installing Dashboard Support|Page 6274